Lipoly Battery Smart Charger + BMS Unit (Standard / Universal Type)
Product Description
Lipoly Battery Smart Charger + BMS Unit (Standard / Universal Type)
For Lipoly Battery with standard BMS charging plug (XH 4-Pin & 3-Pin Charging Connector.) No more $100 LIPO balance chargers that prevent you from going with LIPO/LiFeP04 batteries! This full featured 7.4v & 11.1v LIPO/LiFePO4 Balance charger is an amazing value. VERY popular for smaller capacity (mAh) Airsoft and other custom battery packs. Power Supply already included. Ready to charge your LIPO/LiFePO4 packs right out of the package. Also supports large capacity (mAh) packs, but will require a longer time to be fully charged.
Charging: The charger is a smart charger. Plug and play / easy to use. The light will turn green when its fully charged and red when its charging. Always monitor your battery charging and charge your lipoly battery only on non-flammable surface. Average charging time depends on how much power is left inside the battery and battery capacity. (1500mah is around 30 minute to a hour).
Features: * Built-in balance. Batteries are automatically balanced during charging, ensuring full charge. * Automatic constant voltage, constant current and trickle charging. * Automatically terminate charging process when input voltage is lower that 8V or higher than 17V * Reverse polarity and short circuit protection * Over-Charge and Over-Current protection * Light weight and attractive case * Applicable for Li-ion, LiPo and LiFePO4 battery packs
Specifications: * Applicable Battery Types: LiPo,Li-ion, and LiFePO4 * Battery Count: 2~3 cells * Input Voltage: DC 10~16V, 1.5A * Charging Current: 1A * Balancing Current: 50mA * Balancing Precision: 25mA * Output Connector: 3 pin and 4 pin JST Connector * LED: o Red: Charging o Green: Fully Charged and Balanced
Warning: * Never attempt to charge 2 battery packs simultaneously * Never leave the charger unattended when it's connected to the power supply * Terminate charging when any malfunctions is observed * Keep away from dust,damp, water, heat, direct sunshine and vibration * Never place it on case seat, carpet or something similar. Place the product on heat-resistant, non-flammable and non-conductive surface * Do Not charge the following types of battery: o Lead acid battery or VRLA o NiMH or NiCD battery pack o Non-rechargeable battery (explosion hazard) o Faulty or damaged battery o Any other types except for LiPo/Li-ion/LiFePO4 battery packs o Battery pack which consist of different types of cell, or different brands
For Lipoly Battery with standard BMS charging plug (XH 4-Pin & 3-Pin Charging Connector.) No more $100 LIPO balance chargers that prevent you from going with LIPO/LiFeP04 batteries! This full featured 7.4v & 11.1v LIPO/LiFePO4 Balance charger is an amazing value. VERY popular for smaller capacity (mAh) Airsoft and other custom battery packs. Power Supply already included. Ready to charge your LIPO/LiFePO4 packs right out of the package. Also supports large capacity (mAh) packs, but will require a longer time to be fully charged.
Charging: The charger is a smart charger. Plug and play / easy to use. The light will turn green when its fully charged and red when its charging. Always monitor your battery charging and charge your lipoly battery only on non-flammable surface. Average charging time depends on how much power is left inside the battery and battery capacity. (1500mah is around 30 minute to a hour).
Features: * Built-in balance. Batteries are automatically balanced during charging, ensuring full charge. * Automatic constant voltage, constant current and trickle charging. * Automatically terminate charging process when input voltage is lower that 8V or higher than 17V * Reverse polarity and short circuit protection * Over-Charge and Over-Current protection * Light weight and attractive case * Applicable for Li-ion, LiPo and LiFePO4 battery packs
Specifications: * Applicable Battery Types: LiPo,Li-ion, and LiFePO4 * Battery Count: 2~3 cells * Input Voltage: DC 10~16V, 1.5A * Charging Current: 1A * Balancing Current: 50mA * Balancing Precision: 25mA * Output Connector: 3 pin and 4 pin JST Connector * LED: o Red: Charging o Green: Fully Charged and Balanced
Warning: * Never attempt to charge 2 battery packs simultaneously * Never leave the charger unattended when it's connected to the power supply * Terminate charging when any malfunctions is observed * Keep away from dust,damp, water, heat, direct sunshine and vibration * Never place it on case seat, carpet or something similar. Place the product on heat-resistant, non-flammable and non-conductive surface * Do Not charge the following types of battery: o Lead acid battery or VRLA o NiMH or NiCD battery pack o Non-rechargeable battery (explosion hazard) o Faulty or damaged battery o Any other types except for LiPo/Li-ion/LiFePO4 battery packs o Battery pack which consist of different types of cell, or different brands
|
| ||||
|
|
|
| ||||
|
| ||||
|
|
